The VEYES Lash Lift Kit is known for its high quality, user-friendly design, and naturally curled results. In this guide, VEYES will walk you through how to properly use the solutions included in the kit and answer some of the most common questions along the way.

Standard Usage Instructions

⭐Method 1: Inverted Use (Recommended)

For first-time use or after a long period of inactivity:

Turn the bottle completely upside down (with the pump facing downward) and let it sit for 5–10 minutes. This allows the high-viscosity formula to flow toward the pump fully.
While keeping the bottle inverted, press the pump all the way down to dispense the product.

For daily use:

Before each use, simply invert the bottle for 15–30 seconds.
One full press is enough to dispense the product smoothly and consistently.

⭐Method 2: Upright Use (When Inverting Isn’t Convenient)

Keep the bottle upright and press the pump fully 12–20 times to expel the air inside.
Once the product is dispensed for the first time, future use becomes much easier. Just one full press is enough each time.
No need to invert the bottle again or repeat multiple pumps.

FAQs

Why does a 10ml bottle only contain 5ml of product?

This is not underfilling, but an intentional airless design. A proper air chamber is required to create pressure for full dispensing with no waste or residue.

The 10ml bottle + 5ml formula ensures optimal preservation, preventing air exposure, oxidation, and degradation. Keeping the product fresh, gentle, and consistent from first use to last.

How many clients can one 5ml bottle serve?

Each application uses approximately 0.15g–0.25g of product.

A 5ml bottle can typically serve 20–33 clients.

In a salon setting, the average usage is around 25 clients per bottle, ensuring hygiene, efficiency, and minimal waste.

How much product is dispensed per pump?

0.15–0.25g per full pump—enough for one full set (both eyes).


Precise, clean, and easy to control.

How long should I invert the bottle?

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

What if I don’t want to invert the bottle?

If you prefer to use the bottle upright, simply press the pump fully 12–20 times to remove the air inside.

Once the product starts dispensing, you’ll only need one pump per use going forward.

No inversion and no repeated pumping required.

Leave a Comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.